一、作用

I.  Function

XZM-100振动磨样机能对各种硬度的脆性矿物进行破碎和粉碎，具有效率高，噪音小，无粉尘污染等优点，一九八六年荣获国家质量银质奖，是各类分析、分选、物质检验和商检必备的标准设备。

XZM-100 vibration mill prototype is used to  smash and crush brittle minerals of various hardness degrees. It enjoys high  working efficiency, produces low noise, and causes no dust pollution. In 1986,  it won national silver medal of quality. It is standard equipment necessary for  various analysis, separation, material examination, and commercial inspection.

本机操作方便，能手动或定时自动停车，具有两种转速供不同材质的研磨选择，本机有100g钢研钵和三个10g钢研钵，还可根据用户的不同要求提供其他材质的研钵。

This machine can be easily operated and can  be stopped manually or automatically. It can rotate at two speeds, respectively  applied to grind different materials. This machine is equipped with one steel  mortar weighing 100g and  three steel mortars weighing 10g.  Mortars made of other materials may be available to cater to different  requirements of users.

XZM-100型振动磨样机能对各种硬度的脆性矿物进行破碎和研磨，该机具有效率高，噪音小，无粉尘污染等优点。该机型和部分技术从德国引进,曾获国家质量银质奖。主要用于地质、煤炭、矿山、冶金、化工、建材等部门和大专院校、科研单位的实验室，是各类分析、分选、检验、化验的标准设备。也可用于质检、环保检测。

XZM-100 vibration mill prototype is used to  smash and crush brittle minerals of various hardness degrees. It enjoys high  working efficiency, produces low noise, and causes no dust pollution. This  model and some technology are introduced from Germany. It has won national silver  medal of quality. Such vibration mill prototypes are mainly used in sectors  such as geology, coal, mine, metallurgy, chemicals, and building materials as  well as the laboratories in institutions of higher education and R＆D institutions. They are standard equipment  necessary for various analysis, separation, inspection, and laboratory test.  They can also be used for quality inspection and environmental monitoring.

二、技术参数

Ⅱ. Technical Parameters

注:本公司亦有200g、10g等其它XZM系列振动研磨机供选用。也可提供70g 、100g玛瑙研钵。

Note: Our  company also provides other XZM vibration mill prototypes weighing 200g and 10g as well as agate mortar weighing 70g and 100g.

三、主要结构及工作原理

III. Main Structure and Working Principle

本机主要由机箱（也起消音作用）、电动机、偏心振动机构、研钵（Mn钢或玛瑙等材质）、压紧机构、控制电路等部分组成。

This machine is mainly composed of chassis  (able to reduce noise), motor, eccentric vibration mechanism, mortar (made of  Mn steel, agate, etc), pressing mechanism, and control circuit.

电动机的法兰盘与振动架用螺栓固定，振动器的动力是由旋转的偏心块所产生。

The flange and vibrating grid of motor are  fixed with bolts. The driving force of vibrator is produced by rotating  eccentric block.

本机的压紧机构设置使加紧操作方便可靠，迅速。搬动手把可快速压紧或松开压紧机构，可进行装、换钵，装、卸料动作。当使用70g研钵时，振动盘上需增加一个支承盘和压紧顶盖，这样就能使3个70g的研钵同时工作，也就是可同时研磨3个不同种类的试样。压紧机构可通过增加或减少橡胶压块上的调整片，或调节研钵盖上的锁紧螺母来调整研钵的夹紧程度。

he pressing mechanism of  this machine is so designed as is able to make pressing easy, convenient, and  rapid. Pull the handle and the pressing mechanism can be rapidly pressed or  loosened. Installation and replacement of mortar, as well as filling and discharging  of materials can also be realized. When a mortar weighing 70g is used, one supporting plate and  compacting cover plate need to be added to the vibrating disk so that 3 mortars  weighing 70g can work  simultaneously, i.e. 3 different types of samples can be grinded  simultaneously. The pressing mechanism can adjust the clamping of mortar by  increasing or decreasing the adjustment sheet on the rubber press blocking or  adjusting the locknuts on the cover of mortar.